Herunterladen Inhalt Inhalt Diese Seite drucken

Parts List: Straight Housing Option; Installation: Straight Housing Option - Whale DS0003B Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DS0003B:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 42
CAUTION: Ideally, the showering temperature should be set at 38 ºC (100 ºF) for
health and safety reasons, higher settings will increase the risk of scald injury. Those at
greatest risk of scald injury include children, the elderly, disabled, and diabetics.
WARNING: The Whale Twist® Deck Shower is not suitable for domestic applications.
8. PARTS LIST - STRAIGHT HOUSING OPTIONS
MIXER VERSION
1 Handset and hose with p clamp (screw incl.)
1 Straight housing
1 Locking nut
1 Valve housing with temporary shut off valve
attached (includes 2 retaining screws)
2 WX1532B - adaptor 1/2" BSP female
(supplied with retail models only)
COLD ONLY VERSION
1 Handset and hose with p clamp (screw incl.)
1 Straight housing
1 Locking nut
1 WX1532B - adaptor 1/2" BSP female
9. INSTALLATION - STRAIGHT HOUSING OPTIONS
STEP 1 Choose a suitable location for the
shower to be installed. The unique
design allows the shower to be fitted
on a flat or curved surface, on a
horizontal or angled plane. Ensure
there is sufficient space to allow space
for the handset and hose when stowed.
(See Fig. 2). Ensure that the plumbing
connections and p clamp are mounted
as close as possible to the handset
housing to ensure maximum usable
hose length.
Please note: Before installing, ensure that
sufficient space is allowed for the shower hose
when stowed. Also ensure that it is free from
obstructions when pulled out.
STEP 2. Allowing for the height and width restrictions indicated in Fig. 2, drill one
50mm (2") diameter circular hole in the bulkhead above the water line. (See
Fig. 3) Please note: minimum mounting surface thickness: 3mm (1/8");
maximum mounting surface thickness 19mm (3/4").
Fig. 1
Deck Protect
End cap
Handset
Hose
Fig. 2
Please allow a
minimum width of
250 mm (10") for
hose stowage-
using
TM
P Clamp
Straight
Housing
Valve
Housing
4

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ds0004bDs0005Ds0006Ds0013bDs0014bDs0211b ... Alle anzeigen

Inhaltsverzeichnis