Installation Instruction - Klarstein HEA-MKS-9 Handbuch

Power supply
 The refrigerator must be connected to a properly earthed socket in line with relevant valid country
regulations before operating;
 Check the data label (which is on the side of the refrigerator) for voltage and frequency corresponds to
;
your local one; If not, don't plug your cable into the socket

Installation Instruction

When install a Heat pipe Refrigerator, ventilation should be considered seriously, please refer to the
following:
1, there should be left at least 200 cm³ for ventilation
2, the distance between wall and refrigerator side should be at least 20mm
3, the bottom should be left at least 50mm for air flowing
4, air passing through must not be preheated
5, entire cooling system should be considered in the ventilation
6, the following four pictures show four installation ways: