JK-Products XL-48 Dynamic Power Gebrauchsanweisung Seite 144

Cleaning and maintenance
64/76
– Screw the lid with the hose onto the new canister.
– Push the hose well down so that it touches the bottom of the canister.
– Put the canister back in the device.
– Close the bed base. You should hear the bed base click into place.
Venting
– Press the START/STOP button and top navigation arrow simultaneously.
52 9 /
– Close the canopy.
The system will now be ventilated for 1 minute. AQUA SYSTEM liquid will be
released from the nozzles during this period.
15220 / 2
– Test the AQUA SYSTEM function afterwards. Repeat the ventilation
process if it does not work.
60 sec
13489 / 0
NOTE:
Ventilate after changing the canister by switching over to
preset mode and then select Function 231 (see 'Presettings',
order no. 1011777-..).