Beper 50.002 Bedienungsanleitung Seite 12

Ironing system with pressure gauge Use instructions
Press and at the same time unscrew the cap of the tank and wait a few moments for the tank temperature to
decrease.
Pour 0.75L of water into the tank through the use of the funnel.
Screw the cap back and make sure to close it completely.
Turn the iron and boiler on again.
Cleaning
Before proceeding with any maintenance operation, always make sure that the appliance is disconnected from
the mains and completely cooled.
Internal tank cleaning
You can use normal tap water. However, since the water naturally contains limestone which causes scale in the
tank, to clean it we recommend the use of a solution of water and vinegar (75% water + 25% vinegar), to be left
in the tank for a few hours and then remove it.
External cleaning of the appliance
Use a damp cloth to clean the housing of the appliance. Do not use solvents or detergents to avoid damaging
the body of the appliance.
Technical data
Power: 2000W
Power supply: 220-240V - 50 / 60Hz
Tank capacity: 850 ml
For any improvement reason, Beper will reserve the right to modify or improve this appliance without
notice.
12