ASROCK X79 Extreme11 Handbuch Seite 59

Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE]. (For SATA2_0 to SATA2_3, SATA3_0 and
SATA3_1 ports.)
Set the option "Marvell 9172 eSATA3_0_1 Operation Mode" to [IDE].
STEP 2: Install Windows
system.
2.19 Untied Overclocking Technology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, BCLK enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of UEFI
setup to set the selection from [Auto] to [Manual]. Therefore, BCLK is untied during
overclocking, but PCI / PCIE buses are in the fixed mode so that BCLK can operate
under a more stable overclocking environment.
Please refer to the warning on page 8 for the possible overclocking risk
before you apply Untied Overclocking Technology.
Advanced screen
® TM
7 / 7 64-bit / Vista
X79 Extreme11 Motherboard
Storage Configuration.
TM
/ Vista 64-bit OS on your
59