ASROCK X79 Extreme11 Handbuch Seite 58

2.16 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from top to bottom to
install those required drivers. Therefore, the drivers you install can work properly.
2.17 Installing Windows
RAID Functions
If you want to install Windows
/ SATA2 / SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.18 Installing Windows
Without RAID Functions
If you want to install Windows
/ SATA2 / SATA3 HDDs without RAID functions, please follow the procedures below
according to the OS you install.
Using SATA / SATA2 / SATA3 HDDs with NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [AHCI]. (For SATA2_0 to SATA2_3, SATA3_0 and
SATA3_1 ports.)
Set the option "Marvell 9172 eSATA3_0_1 Operation Mode" to [AHCI].
STEP 2: Install Windows
system.
58
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
Advanced screen
® TM
7 / 7 64-bit / Vista
X79 Extreme11 Motherboard
TM TM
/ Vista 64-bit With
TM TM
/ Vista 64-bit on your SATA
TM TM
/ Vista 64-bit
TM TM
/ Vista 64-bit OS on your SATA
Storage Configuration.
TM
/ Vista 64-bit OS on your