Specification; Package Contents - Connect IT CEP-4000-GR Benutzerhandbuch

BLUETOOTH EARPHONES
CEP-4000-GR
USER MANUAL
Before putting this product into operation, please read carefully all the instructions, even if you are already familiar with using similar
products. Use the product only as described in this manual. Keep this manual in case you need it for future reference.
EN
The electronic version of this user manual can be downloaded on the website
www.connectit-europe.com.
We recommend keeping the original packaging of the product, invoice and warranty certificate at least for the time the warranty is valid.
When shipping the product, we recommend using the original packaging that the product was delivered in that will provide the best
protection for it from being damaged during transport.
1

Specification

„ Bluetooth Earphones
„ Control volume, playlist and phone calls using remote control
„ Built-in microphone for phone calls
„ Bluetooth V4.2 supports A2DP, AVRCP, HSP, HFP
„ Range: up to 10 m
„ Frequency response: 20 Hz - 20 kHz
„ Impedance: 16 Ohm
„ Sensitivity: 95±3 dB
„ 110 mAh Li-ion battery
„ Playback time: up to 6 hours
„ Call time: up to 6 hours
„ Charging time: approx. 1.5 hour
„ Weight: 26 g

Package contents

„ Bluetooth Earphones
„ 3 pairs of in-ear plugs
„ microUSB cable
„ Manual
2
Instructions
Charging
1. Make sure that the headphones are turned off before charging.
2. To charge the headphones, connect the microUSB cable. While the headphones are being charged, red diode will be lit up.
3. Charging from fully discharged battery to fully charged takes approx. 1.5 hours. After being fully charged, the red diode will turn off.
Turning on
Hold the power button. Turning on will be signalized by voice playing from the headphones and blue flashing diode.
Turning off
Hold the power button. Turning off will be signalized by voice playing from the headphones and red flashing diode.