Product Description And Specifications - Bosch GBH 18V-26 D Professional Originalbetriebsanleitung

Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS-plus drill chuck
(2) SDS-plus tool holder
Dust protection cap
(3)
(4) Locking sleeve
(5) Rotational direction switch
(6) Handle (insulated gripping surface)
(7) On/off switch
A)
(8) Battery
(9) Battery release button
(10) Worklight
(11) Release button for impact/mode selector
switch
(12) Impact/mode selector switch
(13) Button for depth stop adjustment
(14) Auxiliary handle (insulated gripping surface)
(15) Depth stop
(16) Button for battery charge indicator
(17) Battery charge indicator
(18) Securing screw for keyed chuck
A)
(19) Keyed chuck
(20) SDS-plus shank for drill chuck
(21) Chuck key
(22) Universal holder with SDS-plus shank
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Rotary hammer
Article number
Rated voltage
Bosch Power Tools
Rotary hammer
Rated power input
Impact rate
Impact energy per stroke
according to EPTA-Proced-
ure 05:2016
Rated speed
– Clockwise
– Anticlockwise
Tool holder
Spindle collar diameter
Max. drilling diameter
– Concrete
– Masonry (with hollow
– Steel
– Wood
Weight according to EPTA-
Procedure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient temper-
ature during operation
and during storage
Recommended batteries
A)
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-6.
A)
Typically, the A-weighted noise level of the power tool is:
A)
Sound pressure level 91 dB(A); sound power level
A)
102 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
A)
Vibration total values a
determined according to EN 60745-2-6:
A)
Hammer drilling into concrete: a
Chiselling: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
GBH 18V-26 D estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
3 611 J16 0..
ent the main applications of the power tool. However, if the
V= 18
power tool is used for other applications, with different ap-
A)
min
min
min
core bit)
B)
(triax vector sum) and uncertainty K
h
= 15.5 m/s
h
2
= 10.0 m/s , K = 1.5 m/s
h
1 609 92A 5GE | (18.11.2019)
English | 15
GBH 18V-26 D
W 425
-1
0–4350
J 2.5
-1
0–980
-1
0–980
SDS plus
mm 50
mm 26
mm 68
mm 13
mm 30
kg 2.9–4.0
°C 0 to +35
°C -20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
2 2
, K = 1.5 m/s ,
2
,