Fabita BIE640LT Bedienungs- Und Montageanleitung Seite 15

pans). Pay attention in placing the cookware
in the correct position on the cooking zones
(Fig.8).
To activate the Bridge function between
two adjacent
simoultaneously on both Zone Selection
keys. The bridge symbol « » will appear on
the rear cooking zone display indicating that
the function is active (Fig.9).
NOTE: The settings of the bridge zone are
only enabled by the front cooking zone keys.
To deactivate
simoultaneously on both Zone Selection
keys. The bridge symbol « » goes off.
• POWER BOOST / QUICK HEATING
This function further reduces cooking time
of a given area taking the temperature to the
maximum power for a 10 minute interval.
At the end of this interval, the cooking zone
power automatically returns to level «9».
The use of this function is indicated for the
short time heating of large quantities of liquid
(eg. water for cooking pasta) or dishes.
To activate this fuction, select a cooking
zone then press the [+] key until the symbol
«P» appears on the cooking zone display.
• WARMING FUNCTION «u»
This function sets the heat temperature of the
selected cooking zone at 42°C to keep food
warm. Once the cooking zone is started,
press the [+] key and select value «1» then
press the [-] key. The symbol «u» will appear
on the cooking zone display, meaning that
the warming function is activated.
• TIMER
This function allows you to set the time from
«01» (1 minute) to «99» (99 minutes) for the
automatic switch off of a cooking zone.
Select a cooking zone by pressing the
corresponding Zone Selection key and
adjust the heat level. Press simultaneously
the [+] and [-] keys to activate the Timer
display. Set the desired time within 10
seconds using the [+] and [-] keys. Wait
cooking zones
the function
10 seconds for the automatic confirmation
of the settings. The time countdown will be
shown on the timer display.
When time elapses the cooking zone will
press automatically switch off, the display will show
a flashing «00» and an acoustic signal will be
heard. Press any key on the control panel to
stop the signals.
To disable the timer of a cooking zone press
the corresponding Zone Selection key then
press simoultaneously the [+] and [-] keys
press to turn on the Timer display. Bring the timer
value back to «00» by using the [-] key. Wait
10 seconds for the automatic confirmation.
The led on the display of the cooking zone
stops flashing.
• EGG TIMER/REMINDER
This function allows you to set an acoustic
reminder which stays active after switching
the appliance off.
To enable this function switch on the
appliance then press simoultaneously the
[+] and [-] keys. The timer display lights up.
Set the time, ranging from «01» (1 minute)
to «99» (99 minutes), by pressing the [+]
and [-] keys. Wait 10 seconds for the
automatic confirmation of the settings. The
time countdown will be shown on the timer
display.
When time elapses the display will show a
flashing «00» and an acoustic signal will be
heard. Press any key on the control panel to
stop the signals.
To disable the Egg timer/Reminder function
press simoultaneously the [+] and [-] keys
and bring the timer value back to «00» by
using the [-] key. Wait 10 seconds for the
automatic confirmation.The led on the
display of the cooking zone stops flashing.
• CONTROL LOCK « ro »
Controls can be locked in order to prevent
any risk of unintentional changes to the
settings (children, cleaning operations, etc.).
To activate this function press the Lock
key for at least 3 seconds. The symbol
15