Fiesta Queen 205914 Gebrauchsanweisung Seite 5

• Always clean the appliance and other accessories after each use (-->Cleaning and main-
tenance).
• Do not use water jet, flush directly with water or steam cleaner as the parts will get wet
and electric shock might be resulted.
• Caution! Securely route the power cord if necessary in order to prevent unintentional pull-
ing or contact with the heating surface.
• Do not wash the appliance with water. Washing can cause leakages and increase the risk
of electric shock.
• Do not clean or store the appliance unless it is completely cooled down.
• Always remove the plug from the socket when filling or cleaning the appliance.
• The electrical installation must satisfy the applicable national and local regulations.
• The oil container with heating element should be placed in a safe position in your kitchen
before usage due to the hot contents when in use.
• No part is dishwasher safe.
Intended use
• The appliance is intended for professional use
and can be operated only by qualified personnel.
• This appliance is intended only for frying appro-
priate food such as donut, fries, etc in commercial
use. Any other use may lead to damage of the ap-
pliance or personal injury.
Grounding installation
This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the electric
Preparations before using for the first time
• Check to make sure the appliance is undamaged.
In case of incomplete delivery (2 frying grids & 1
bottom grid included) or any damages, contact
your supplier immediately and DO NOT use the
appliance.
• Remove all the packing material and protection
film (if applicable).
• Clean the appliance with luke-warm water and a
soft cloth.
• Operating the appliance for any other purpose
shall be deemed a misuse of the device. The user
shall be solely liable for improper use of the de-
vice.
current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
• Place the appliance on a level and steady surface,
unless mentioned otherwise.
• Make sure there is enough clearance around the
appliance for ventilation purposes. Especially,
allow enough spacing for placing the frying grid
holder (8).
• Position the appliance in such a way that the plug
is accessible at all times.
EN
5