Emos EM170 HD Gebrauchsanleitung Seite 6

• In the Channel Editing menu, select the desired programme using the / buttons and press
the YELLOW button.
• A table will be shown: Enter the password – by default set to 000000. After entering the code, the
menu will require no further confirmation. A blue lock icon will be shown next to the channel.
• Repeat the procedure for other channels.
• Pressing the YELLOW button again on a locked channel will remove the lock.
• If you encounter a locked channel while watching the TV and switching channels, you will be prompt-
ed to enter password. After entering the correct password, the channel will be unlocked for viewing.
Renaming TV or Radio Channels
• In the Channel Editing menu, select the desired programme using the / buttons and press
the RECALL button.
• The screen will show a keyboard; enter your desired channel name and confirm with the OK
button on the screen.
EPG
Programme Guide
• The EPG functions shows the broadcasting schedule of the majority of channels for the upcoming
7 days.
• You can call up the function by pressing the EPG button on the remote.
• Use the / buttons to browse the list of programmes within a single channel; change channels
using the / buttons.
• If you need to move pages, use the RED and GREEN buttons.
• The YELLOW and BLUE buttons will scroll the individual pages of information about the selected
programme.
Adding TV or Radio Programme into Timer, Setting Recording
• To add a programme into the recording timer, press the OK button.
• Check or adjust the timer setting:
• timer repeat (once, weekly, daily)
• select timer mode (switching, recording)
• Confirm the timer with OK.
Selection (Channel Sorting
• [By LCN]: Channels will be sorted in order determined by the operator.
• [By name]: Sorts channels by name.
• [By service ID]: Sorts channels by ID.
• [By ONID]: Sorts channels by ONID.
LCN
• [Off ]: Cancels sorting by LCN.
• [On]: Enables sorting by LCN.
Image
To enter the Image menu, press the MENU button and select item Image using the / buttons. The
menu contains all display settings for your TV. Use this menu if your TV channels are displaying incorrectly.
A large portion of the settings is intended mainly for HDMI interfaces.
Aspect Ratio
Here you can select based on which ratio suits you the best. However, we recommend keeping the
default value displayed by the receiver. Only then can you be sure that there will be no deformation
or cropping of video.
Resolution
• [480P]: Only for NTSC standard and primarily SCART connection
• [576P]: Only for PAL and primarily for SCART connection
• [720P]: For both NTSC and PAL standards connected via HDMI
• [1080I]: For both NTSC and PAL standards connected via HDMI
• [1080P]: For both NTSC and PAL standards connected via HDMI
6