Cisco Linksys NSLU2 Kurzanleitung Seite 4

• If a flash memory or USB disk
is connected to the Disk 2
port, the Disk 2 LED should
be lit.
• If a USB hard disk drive is
connected to the Disk 1 port,
the Disk 1 LED should be lit.
• If the Network Storage Link
repeatedly beeps, there is a
hardware problem. Refer to
the Troubleshooting section
of the User Guide on the CD-
ROM for possible solutions.
Proceed to Step 2.
4
NOTE: For details about
removing or changing USB
storage devices, refer to the User
Guide on the CD-ROM.