Samsung SRD-830DC Kurzanleitung Seite 9

CONNECTING EXTERNAL SATA HDD
M 
SRD-830DC/1610DC/1630DC does not support a port for SATA connection.
1. There are two external SATA ports on the rear side of the product.
2. If an external SATA HDD is connected to the system, recognition and settings are available in "Menu > Device >
Storage Device".
3. The DVR supports Hot Plug function to allow connection and disconnection of SATA HDD devices while the
system is in use.

J
Only one SATA HDD can be connected to an external SATA port.

Use a cable shorter than 1 m for the external SATA HDD connections.
CONNECTING POS DEVICE
1. You can connect a POS device to the RS-232C port on the product's rear side when you connect it directly with
a RS-232C cable.
2. Connection setup for the RS-232C port is available in "Menu > Device > POS Devices", press the
<POS Device Setup> button and set <Baudrate, Parity, Data, Stop bit and Transfer Type>.
CONNECTING THE ALARM INPUT/OUTPUT
The Alarm In/Out port at the back is composed of the following.
1. Alarm In Port for SRD-830DC/850DC/870DC
2. Alarm In Port for SRD-1610DC/1630DC/1650DC/1670DC
3. Alarm Out Port
Z6809133101A_SRD-850DC-QG_ENGLIS9 9 Z6809133101A_SRD-850DC-QG_ENGLIS9 9
English _9
2010-07-13 오전 9:32:45 2010-07-13 오전 9:32:45