Herunterladen Inhalt Inhalt Diese Seite drucken

Replacing The Rechargeable Battery; Charging The Rechargeable Battery; Maintenance And Care - LIVARNOLUX HG00510 Bedienungs- Und Sicherheitshinweise

Led-solarleuchten
Vorschau ausblenden Andere Handbücher für HG00510:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Replacing the rechargeable battery

The battery should be replaced every 12 months to ensure
optimum performance.
1. Separate the solar cell housing
by moving it anti-clockwise (see Fig. A). Switch off the
2
light with the ON- / OFF-switch
2. Loosen the fastening screws
head screwdriver and then lever out the battery compart-
ment lid
slot screwdriver (see Fig. B).
3. Turn over the battery compartment lid
damage the cables and cable connections (see Fig. B).
4. Exchange the old rechargeable battery
Take care to the correct polarity, when inserting the new
rechargeable battery. The polarity is indicated in the bat-
tery compartment. The new rechargeable battery has to
have the same technical data like the old one.
5. Now again fasten the battery compartment lid
the fastening screws
driver. Slide the On / Off switch
6. Connect the solar cell housing
shade
each other (see Fig. C).

Charging the rechargeable battery

Note that the product must be switched on when the battery
is charging.
The charging time of the battery when the solar cell is used
depends on the intensity of the sunlight and the angle of
incidence of the light on the solar cell. Place the solar cell as
perpendicular as possible to the angle of incidence of the
light. In this way you will receive the highest light levels.

Maintenance and care

The light-emitting diodes cannot be replaced. The product is
maintenance-free, except for any necessary change of battery.
Clean the product regularly with a dry, lint-free cloth. Use a
slightly dampened cloth to remove more stubborn dirt.
10 GB/IE/NI
of the solar cell housing
7
6
and then connect every part of the product to
2
from the lamp shade
1
.
5
by using a small cross
6
1
by using a small cross head screw-
to the position ON.
5
again to the lamp
1
with the help of a
, take care not to
7
to a new one.
8
, fasten
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis