Gyronavi Box Using; Multiple Gyronavi Box In Operation - mamibot Sweepur 120 Gebrauchsanleitung

GyroNavi Box Using

GyroNavi Box Navigator
The GyroNavi Box is used as a navigator which guides the robot to work mainly through transmitting the
infrared signal in a more efficient way.
Setting up connection between the GyroNavi Box and the robot
1) When Sweepur 120 starts cleaning, it will trigger a connection signal with the GyroNavi Box navigator.
The navigator system indicator will glow with blue light. After connection is set up successfully, the indi-
cator light will turn to solid blue.
2) The GyroNavi Box can tell if the robot is within the navigator range or not. When the robot removes
beyond the navigation range (e.g., it moves to another room, or beyond the range of navigation), the
indicator light numbers will be less or the light will turn off.
3) Sometimes the robot may occasionally move toward the GyroNavi Box in order to confirm the position
of itself and the GyroNavi Box. After it confirms the position, it will resume cleaning while creating a new
cleaning map. If the cleaning is paused, the robot will reserve the map accordingly.
Cleaning without GyroNavi Box Navigator
The robot can also clean floors when the GyroNavi Box is not connected or without GyroNavi Box. However
the cleaning efficiency will be reduced and cleaning area will be smaller, and cleaning in edges of each
area can't be guaranteed.
Setting of GyroNavi Box Navigator
One GyroNavi Box in Operation
1) Place the GyroNavi Box in center of the to-be-cleaned area, and turn on the robot near the GyroNavi
Box.
2) The robot starts cleaning near the GyroNavi Box, it will move to other areas according to selected clea-
ning mode and the signal range of GyroNavi Box Navigator.
3) When cleaning more than one room, please make sure to put the GyroNavi Box in center of the area
to maximize cleaning coverage.
4) Please move the GyroNavi Box to other rooms after one room is cleaned.

Multiple GyroNavi Box in Operation

1) You can use more than one GyroNavi Box to increase the cleaning coverage in single cleaning cycle.
Extra GyroNavi Box shall be purchased separately from local distributors.
2) Other GyroNavi Box shall be placed in areas adjacent to the coverage area of the first GyroNavi Box.
There should be 6-7m distance between each GyroNavi Box to avoid overlap of cleaning coverage.
3) The robot will connect with other extra GyroNavi Box automatically when it is moving from one area to
another.
Cleaning
with multile
GyroNavi Box
7
Cleaning
with Single
GyroNavi Box