Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - mamibot Sweepur 120 Gebrauchsanleitung

Wischroboter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17
How to Operate Sweepur 120
Operation of GyroNavi Box Navigator
1) Turn on the GyroNavi Box by switching its button to "1". The indicator light will glow with blue light. When
connection between the robot and GyroNavi Box succeeds, the indicator light will turn to solid blue
light. If you forgot to turn on the GyroNavi Box, the robot will generate signal to start the GyroNavi Box
itself. The indicator light turns to solid blue after connection is succeeded.
2) Place the GyroNavi Box on a
face to the room center.
Switch to "1" to
turn it on.
Important:
1) Please make sure the GyroNavi Box Navigator is placed straight up against the ceiling, where without
any barrier that may interrupt the signal from navigator to the ceiling.
2) Don't move the GyroNavi Box once the robot has started cleaning as it may impair its performance.
3) Don't put the GyroNavi Box on
Cleaning Modes and Buttons
Place the robot on
GyroNavi Box Navigator.
Power Button: Press it to start,
Deep Cleaning Button: Press it for Deep Cleaning Mode, when it ist cleaning, press once to pause it.
Quick Cleaning Button: Press if for Quick Cleaning Mode, when it is cleaning, press once to pause it.

Maintenance

Direction Wheel Maintenance
Debris may get attached around the direction wheels during cle-
aning. We strongly suggest you for routine inspection and cleaning
to the direction wheels to avoid reducing its cleaning
It's hard to clean the notch near the direction wheel. Please use
tweezers or scissors to clean it periodically.
table, and make sure the indicator blue light points back to wall and
as the cleaner may run into it and move it.
and keep it 2-2.5m from the GyroNavi Box, make sure the robot faces to the
blue light will be on. Press for 2 seconds to turn off the robot.
When the robot detects the Gy-
roNavi Box, one of the three indi-
cator lights turns BLINKING BLUE.
When connection is successful,
the indicator light turns SOLID
BLUE. With low battery, the indica-
tor light also turns BLINKING BLUE.
9
The indicator light of Gyro-
Navi box. You can also
press it to turn off the po-
wer and disconnect with
the robot's signal.
Access Notch

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für mamibot Sweepur 120

Inhaltsverzeichnis