Battery And Charging; Product Parameters - mamibot Sweepur 120 Gebrauchsanleitung

Battery and Charging

Charging of robot
• Stand Sweepur 120 on its end to access the charging port.
• Plug the adapter into a standard electrical outlet and into
Sweepur 120's charging port.
• Charge the robot until a solid blue light appears on the power
button.
Note:
If the power button shows solid blue light, it means the battery is fully charged. Please be aware of that the
charging time or operating time may slightly vary under different working temperature, floor condition or
affected by other various external factors.
Don't charge the robot when the wet mopping cloth or wet mopping pad is attached. Only charge the
robot with original adapter to avoid any possible damage to the robot.
Please dispose of all batteries properly by finding a recycling resource near you.
Charging of GyroNavi Box (Navigator)
• For first time use of the GyroNavi Box, please move the bottom switch to „1".
Please move the bottom switch to „0" if you'll leave it for long time unused.
•
• Hold the GyroNavi Box, insert the plug of its charging adapter to the bottom
charging port, and insert the other end to the power socket.
• Charge the GyroNavi Box until its indicator shows solid GREEN light.

Product Parameters

Parameters of Sweepur 120
Working Voltage
Maximum Power
Charging Time
Working time
Dimension
Net Weight
Charging Parameters
Input Charging Voltage
Output Voltage
Rated Frequency
Output Current
7.2 V
3.6 W
2 hrs for Sweepur 120
4 hrs for GyroNavi Box
4 hrs in Quick Clean Mode (Dry sweeping)
2.5 hrs in Deep Clean Mode (Wet mopping)
22 *22*7.8 cm
1.5 kgs
100-240V AC
12V DC
50/60 Hz
1A
4
Charging Port
Power
Charging Port
Button