Installation Options - Bose DesignMax DM2S Installationsanleitung

Setup

Installation Options

Installation Options and Accessories
q
Mounting bracket (included)
w
DMSBRKT Pan-and-tilt bracket (optional)
Wiring the Loudspeaker
Wire Gauge
The DesignMax DM2S loudspeaker is designed to work with 18 AWG (0.8 mm
Connection Diagrams
Expose six millimeters (1/4 inch) of bare wire to attach to the terminals.
Note: The loudspeaker is not
rated for use with a rigid conduit.
The loudspeaker is suitable
for a flexible conduit or wiring
connection only.
Loudspeaker Settings
4 • English
q
70V/100V
w
) to 14 AWG (2.1 mm
2
1.2W 2.3W
2..3W 4.5W
* Factory default ** NC: No Connection (do not use)
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
PRO.BOSE.COM
) size wire only.
2
16Ω
70V
4.5W 9W*
9W NC**
100V
DesignMax DM2S • Installation Guide
16Ω