Philips HQ6990 Bedienungsanleitung Seite 9

2 2
1 1
2 2
1 1
 Clean the inside of the shaving unit and the
hair chamber with the cleaning brush.
5 Put the shaving unit back onto the shaver.
Every two months: shaving heads
1 Switch off the shaver. Remove the mains plug
from the wall socket and pull the appliance plug
out of the shaver.
 Press the release button (1) and remove the
shaving unit ().
 Turn the wheel anticlockwise (1) and remove
the retaining frame ().
 Remove the cutters and guards and clean them
with the cleaning brush supplied.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is
restored.
EnglisH
11