Herunterladen Inhalt Inhalt Diese Seite drucken

Additional Safety Information For Mixing Machines - GMC GPM1600 Bedienungsanleitung

1600w
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 34
Additional Safety Information for Mixing
Machines
• This machine is designed for mixing water-based liquids with
powdered building materials including, but not limited to thinset,
sealing and levelling compounds, cement, grout, textured coatings,
etc.
• With the correct accessory attached, this tool may be used to blend
dispersion paints, varnish, resins and other coatings
• This machine is NOT intended to be used with dusty compounds
GB
such as graphite, or with salt solutions, corrosive agents or liquid
manure
• This product does NOT satisfy food hygiene standards and is NOT
to be used for preparing food or as a kitchen appliance
• Always use the CORRECT mixing paddle or accessory for the
material being mixed. Working with an incorrect accessory might
overload the tool and lead to spillage, insufficient blending or
personal injury
• Always inspect the power cord and connector before use. If
you locate any damage, have the cord replaced by a qualified
electrician before attempting to use the machine
• Before use, check the accessories are safely installed
• NEVER use the machine in damp or wet locations. If the machine
gets wet, ensure it is disconnected from the power supply and
ensures it dries COMPLETELY before further use
• ALWAYS position yourself securely, maintain sure-footing and
operate the tool with BOTH hands
• DO NOT attempt to mount the tool on a stand or tripod. NEVER
leave the machine running unattended
• Unplug the machine from the mains power supply after EVERY
use, to avoid accidental switch-on
• Always route the power cord towards the rear of the operator,
AWAY from the machine and work area. Ensure that the cable
does not present a tripping hazard for the operator and other
people in the vicinity
• If you are using this machine with an extension lead, always
unwind the cable completely.
WARNING: This tool may ONLY be connected to power supplies
that are protected by a RCD device. Test the function of any RCD
regularly.
8

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis