Specifications; General Safety - GMC GPM1600 Bedienungsanleitung

Specification
Model number:
Voltage:
Power:
No load speed:
Output drive thread:
Mixing paddle diameter:
GB
Mixing capacity:
Power cord length:
Ingress protection:
Protection class:
Weight:
Sound and vibration information:
Sound Pressure L :
PA
Sound Power L :
WA
Uncertainty K:
Weighted vibration a (main handle): 3.02m/s
h
Uncertainty K:
As part of our ongoing product development, specifications of GMC
products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
GPM1600
230 ~ 50Hz
1600W
180-460/300-700min -1
M14x2 female thread
160mm
160Ltr
2.5 m
IP20
6.5kg
87dB(A)
98dB(A)
3dB
2
1.5m/s
2
WARNING: Always wear ear protection where the sound level
exceeds 85dB(A) and limit the time of exposure if necessary. If sound
levels are uncomfortable, even with ear protection, stop using the
tool immediately and check the ear protection is correctly fitted and
provides the correct level of sound attenuation for the level of sound
produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense
of touch, numbness, tingling and reduced ability to grip. Long term
exposure can lead to a chronic condition. If necessary, limit the length
of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature,
as vibration will have a greater effect. Use the figures provided in
the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined
according to EN60745 or similar international standards. The figures
represent normal use for the tool in normal working conditions. A
poorly maintained, incorrectly assembled, or misused tool, may
produce increased levels of noise and vibration. www.osha.
europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long
periods of time.

General Safety

WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
WARNING: This appliance is not intended for use by persons
(including children) with reduced, physical or mental
capabilities or lack of experience or knowledge unless they
have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the
appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
6