KikkaBoo UGO Gebrauchsanweisung Seite 7

2
Front/rear wheel install and remove:
Insert front wheel core, until you hear a sound clear, „Kacha" sound, indicating that front wheel has been installed in
place. The rear wheel core insert rear axle tube, until you hear a sound clear, „Kacha" sound, that rear wheel has been
installed in place.
3
Seat install and remove:
Take the seat in accordance with the schematic diagram of the arrow The direction of the direction of the seat directly
into the frame Plastic fixed position can be. Follow the direction indicated by the arrow. Press the release button on
both sides, you can remove Chair seat arm rest. Make a plastic part until you hear it clear. „Click", that has been installed
in place. Follow the direction indicated by the arrow. Press the release button on both sides, you can remove handrail.
The sun shade is inserted into the seat of the chair. Make a plastic part until you hear it clear. „Click", that has been
installed in place , and finally put the zipper on the back. Follow the direction indicated by the arrow. Press both sides
of the red area button up, open the rear zipper, you can remove the help hand.
4
Carryingcot install and removing:
Open the inner lining zipper, press the Fig. the direction of the arrow to pull the pull rod into the A B C D four positions,
and then mounted on the lining can. Lying in accordance with the schematic diagram of the arrow Direction of the
seat directly into the frame plastic Fixed position can be. Follow the direction indicated by the arrow. Press the release
button on both sides, you can remove chair.
5
Carseat Install and removing:
I nstall the car seat cloth cover Figure ABC three position fixed position can be. The car seat is in accordance with the
schematic diagram of the arrow The direction of the direction of the seat directly into the frame Plastic fixed position
can be. Follow the direction indicated by the arrow. Press the release button on both sides, you can remove Carseat.
6
Seat dual-directional regulation:
Lift your finger to the side of the chair and press on both sides. Push the button and pull the seat back to the rear. Re
insert the seat for the rear seat Seat slot.
7
Bidirectional regulation of automobile seat:
Put your finger in the car seat and press two side release button, the seat will be pulled out after the change. Re insert
the seat for the rear seat seat slot.
8
Carseat backrest adjustment:
Seat seat, lying, lying three adjustment festival. Pull the back of the hand and the back. Up and down regulation, the
maximum adjustment angle is 155 degrees, the minimum adjustment angle of 95 degrees.
9
Seat footrest adjustment:
Hands hold the foot pedal adjustment button, flat foot can be lengthened baby sitting. Adjust the foot pedal to the
use of the state.
10
Hand adjustment:
Hands hold grip adjustment button, Can handle adjustment, suitable for different body the implementation of an
expert.
11
Front-wheel alignment:
First, the front wheel alignment direction, the to the parts of the position, push down can be. The directional pieces up,
the front wheel is can be rotated 360 degrees.