Herunterladen Inhalt Inhalt Diese Seite drucken

Pentair Foleo 5800 XTR Benutzeranleitung Seite 8

Vorschau ausblenden Andere Handbücher für Foleo 5800 XTR:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
User Guide Foleo
Softening
Number of people .............................................1-2 ........................3-4 ........................5-6........................7-8
Capacity & salt consumption for the different salt dosage setting
Softener
Salt dosage (g/L of resin)
Salt amount per regen (kg)*
3
Softener capacity [°Fm
]
3
Capacity in m
for 30°F inlet water hardness and 10°F
residual hardness setting
Average estimated salt savings compared to maximum
yearly salt consumption that would have a standard
softener regenerating with 80 g/L
set on 4 days, reserve at 20%
Softener
Salt dosage (g/L of resin)
Salt amount per regen (kg)*
3
Softener capacity [°Fm
]
3
Capacity in m
for 30°F inlet water hardness and 10°F
residual hardness setting
Average estimated salt savings compared to maximum
yearly salt consumption that would have a standard
softener regenerating with 80 g/L
set on 4 days, reserve at 20%
* Foleo is featured with variable refill therefore the salt quantity required is calculated by the controller at each regeneration start. This
maximum amount correspond to cases where 100% of the capacity would have been exhausted or to what a standard softener without
variable refill would consume.
Note
This example is calculated for a salt dosage fop 80 g/L
30°F it may be required to increase the salt dosage to obtain a proper resin bed regeneration. The
same simulation with 120 g/L
simulation done at 160 g/L lead to an estimated salt saving of 46%.
Softener connections
Inlet/Outlet........................................................1"
................................................... ½
Drain line
...................................... ½
Overflow drain line
8 / 116
calendar override
resin
calendar override
resin
lead to an estimated average salt saving of 35,5%, while the same
resin
" O.D.
"
Foleo 10L
80
0.8
48.4
2.42
29.3%
Foleo 20L
80
1.6
96.8
4.84
29.3%
. Should the inlet hardness be grated the
resin
Ref. MKT-UG-038 / D - 15.11.2019
Foleo 15L
80
1.2
72.6
3.6
Foleo 30L
80
2.24
135.52
6.78

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis