Scantronic Secureconnect; Proximity Tags; Internal Radio Sounders; External Sirens - Scantronic i-on Serie Benutzerhandbuch

Note: Other detectors are available –
please contact your installer for details.
Note: Since there is normally only one
detector per zone, the terms "zone" and
"detector" are often used interchangeably.

Scantronic SecureConnect™

The Scantronic SecureConnect
app allows you to monitor
and control your alarm system
over the internet from your
phone or tablet.

Proximity tags

Each user can have a unique
proximity tag. When presented to a
keypad, the tag performs the same
action as entering an access code.
Proximity tags make it easier for you to set
or unset the system, and there is no need
to remember an access code.

Internal radio sounders

These are intended for use
in areas that are out of
audio range of a keypad
but where you need to
hear alarms, entry tones,
exit tones and other
sounds.

External sirens

These are mounted
externally, high up in
a visible location for
deterrence. They include
a powerful sounder and
strobes. Wired and radio
sirens are available. Up to
four external radio sirens
can be used for strategic
placement around your
property.

Network cameras

Internal and external network cameras are
available. These allow the control unit to
record images when an alarm occurs.
You can view the images through
the system log, including via the
SecureConnect app. The images can also
be sent automatically to an email address
when an alarm occurs.

Remote controls

Each user can have a
portable remote control to
set or unset the system or
operate output devices from
a distance.

Hold-up alarm transmitters

Small portable
Hold-Up Alarm (HUA)
transmitters, also
known as Panic Alarms
(PAs), allow you to start
a hold-up alarm from
anywhere in range of
your control unit.

Output devices

Your installer can set up your alarm system
to switch external devices, such as lights or
heating systems, on or off.
Devices can switch on or off automatically,
such as when the system is set or when
an alarm occurs. Alternatively, you can
switch them on or off manually from a
keypad, using a remote control or from the
SecureConnect app.
Page 5