Operation - cecotec FORCECLIMA 7050 Bedienungsanleitung

ENGLISH

4. OPERATION

LED CONTROL PANEL
1. Timer
2. Fan speed selection
3. Up
4. Down
5. Sleep
6. Mode selection
7. Power
8. Display window
When the machine is turned on for the first time, it will emit a start-up sound and will switch
to standby mode.
Timer
While the device is turned on, press the key to deactivate the timer; in the case of power off,
press the key to activate the timer function. Press the key, when the timing symbol flashes, press
the up and down keys to select the required operating time. Timing values can be set in 1-24
hours and the timing value is adjusted up or down in 1-hour intervals.
Fan speed selection
In cooling and fan mode, press the key to select high or low speed.
In dehumidifying mode, the speed function is not available and it will operate in low speed by
default.
Up and down
Press the two keys to change the setting temperature or setting time:
• While setting temperature, press up key or down key to select the required temperature
(not available in fan or dehumidifying mode).
• While setting time, press up key or down key to select the required time.
Sleep mode
While the product is operating in cooling mode, when sleep mode is activated, the operating
temperature will increase by 1 ºC during the first hour. After 1 hour, the temperature will increase
by 1 ºC again and will then stay constant.
Sleep mode is not available during dehumidifying or fan function. It will automatically stop
operating when the tank is full or when it switches to standby.
Mode selection
During operation, press the key to switch between cooling, dehumidifying and fan mode.
On/off
24 FORCECLIMA 7050
05244_FORCECLIMA 7000_Manual_LI_MV.indd 24 19/12/18 12:51