Safety Of Others; Specific Safety - Alemite 596-Serie Benutzer- Und Wartungsanleitung

collection can reduce dust-related
hazards.
4 Power tool use and care
4.1 Do not force power tool. Use correct
power tool for your application. The
correct power tool will do the job bet-
ter and safer at the rate for which it
was designed.
4.2 Do not use power tool if switch
does not turn it on and off. Any
power tool that cannot be controlled
with switch is dangerous and must be
repaired.
4.3 Disconnect plug from power source
and/or battery pack from power
tool before making any adjust-
ments, changing accessories, or stor-
ing power tools. Such preventive
safety measures reduce the risk of
starting power tool accidentally.
4.4 Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with power tool
or these instructions to operate
power tool. Power tools are danger-
ous in the hands of untrained users.
4.5 Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect power
tool's operation. If damaged, have
power tool repaired before use. Many
accidents are caused by poorly main-
tained power tools.
4.6 Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less
likely to bind and are easier to control.
4.7 Use power tool, accessories and
tool bits etc. in accordance with
these instructions, taking into
account working conditions and work
to be performed. Use of power tool for
operations different from those
intended could result in a hazardous
situation.
5 Battery tool use and care
5.1 Recharge only with the battery
charger specified by manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of
fire when used with another
battery pack.
5.2 Use power tools only with specifi-
cally designated battery packs. Use
of any other battery packs may create
risk of injury and fire.
5.3 When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connection
from one terminal to another. Short-
ing battery terminals together may
cause burns or a fire.
5.4 Under abusive conditions, liquid
may be ejected from battery; avoid
contact. Liquid ejected from battery
may cause irritation or burns. If con-
tact accidentally occurs, flush with
water. If liquid contacts eyes, seek
medical help.
6 Service
6.1 Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
5

Safety of others

This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruc-
tion concerning use of appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with appliance.

Specific safety

Always wear eye protection. Grease injection
injuries are a very serious injury. Hold hose
only in the area of spring guard. Avoid acci-
dental starting. Be sure switch is not
depressed when inserting battery pack.
Replace hose at first sign of wear, kink or
damage to outside jacket.
Do not bend hose so that it becomes
kinked.
Do not overreach. Keep proper footing
and balance at all times. Proper footing and
balance enable better control of tool in unex-
pected situations.
Use safety equipment. Always wear eye
protection.
Dust mask, non-skid safety shoes, hard
hat or hearing protection must be used for
appropriate conditions.
The gun uses lubricants that may be flam-
mable and poisonous if ingested. Do not use
gun near open flame or other fire hazards.