Safety Instructions - Ribiland PRW500A Bedienungs- Und Wartungsanleitung

III. SAFETY INSTRUCTIONS
Before using this product, read and understand all safety instructions.
Always follow the safety instructions to minimize risk of damage to property, and to minimize any
risk of damages and injuries to persons and animals.
WARNING! When using the product the safety rules must be followed.
For your own safety and bystanders please read these instructions before operating the product.
Please keep the instructions safe for later use.
READ ALL THE INFORMATION BEFORE OPERATING THE PRODUCT.
1. Keep work area clean
Cluttered areas invite accidents and injuries.
Check your lawn and remove any stone or object before mowing.
2. Consider work area environment
Do not expose product to rain or to humidity.
Do not use product in damp or wet environment .
Keep work area well lit (natural light or sufficient artificial lighting).
Do not use product where there is risk to cause fire or explosion (close to flammable liquids, solids
or gas).
3. Guard against electric shock
Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).
4. Keep children away
Never allow children or people unfamiliar with the instructions to use the product
Do not let bystanders (esp. children) touch the product or its power cable or extension cord.
All bystanders (esp. children) should be kept away from product and work area.
Keep the product away from children or from their environment. Never allow children to operate the
product. Children should be supervised to ensure that they do not play with the product.
5. Store idle product
When not in use, product should be stored in a dry, high or locked up place, out of reach of children.
6. Do not force the product
It will do the job better and safer at the rate speed for which it is intended.
7. Use the right product
Do not force small capacity product or attachment to do the job of a heavy duty product.
Do not use the product for purposes other than those for which it is intended. The product will do a
better and safer job if it is used only for the purposes it was designed for.
8. Dress properly
Do not wear loose clothing or jewellery; they can be caught in moving parts.
Wear protecting hair covering to contain long hair.
9. Use protective equipment
Wear protective equipment appropriate to working conditions and work environment
Wear protective helmet, safety goggles, ear mufflers, face or dust mask, rubber gloves and non-skid
footwear to reduce the risk of personal injury during products use or manipulation.
10. Do not abuse the cable
Never carry the product by the cable or yank it to disconnect it from the socket.
Keep the cable away from heat, oil and sharp edges.
Inspect cable periodically and if damaged have it repaired by an authorized service facility.
Inspect extension cords periodically and replace, if damaged.
Before use, check the supply and extension cord for signs of damage or ageing.
Do not use product if the power cable is damaged or worn.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.