Environment Protection; Control Panel; Switching Off - Atag KF8178WDL Benutzerhandbuch

18

Environment Protection

This appliance does not contain gasses
which could damage the ozone layer,
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-

CONTROL PANEL

Appliance ON/OFF button
1
Display
2
Bottom Compartment Temperature
3
warmer button
Bottom Compartment Temperature
4
colder button
Alarm off button
5
Light off button
6
Display
Top Compartment indicator
1
Top Compartment temperature indica-
2
tor and timer indicator
Bottom Compartment temperature in-
3
dicator
Bottom Compartment indicator
4
Alarm indicator
5
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power
socket.
1
8 7
1 2
min
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
2
6 5 4 3
Top Compartment Temperature warm-
7
er button
Top Compartment Temperature colder
8
button
It is possible to change predefined sound of
buttons to a loudly one by pressing togeth-
er Light off button and Temperature colder
button for some seconds. Change is rever-
sible.
3
5 4
2. Press the ON/OFF button if the display
is off.
3. If "dEMo" appears on the display, the
appliance is in demonstration mode.
Refer to "What to do if...".
4. The temperature indicators show the
set default temperature.
To select a different set temperature refer to
"Temperature regulation".

Switching off

To switch off the appliance do these steps:
are recyclable.