Tecnotest 5875 Bedienungsanleitung Seite 39

BATTERY CHARGER ____________________________________________________________ TO USE CORRECTLY
TO USE THE BATTERY CHARGER CORRECTLY
Comply with the following instructions in order to use your Process Battery
Charger in complete safety:
• Process must be installed in a dry and well ventilated place so that it can
be allowed to cool. Never expose the instrument to direct sunlight or use
near heat sources.
• Prevent the instrument from being hit or sharply moved.
• Never obstruct the ventilation slats of the instrument.
• Never wet the instrument with water or other liquids. Do not touch it with
wet hands.
Never rest anything on the powering cable and never bend this at a right
•
angle.
• Never pull the powering cable or charging cables (red and black).
• Always disconnect the powering cable if the instrument is to remain
unused for a long period of time.
It is advisable to keep the wrapping and to use it again if the
instrument is moved to another site.
OPERATING INSTRUCTIONS
BATTERY CHARGER ____________________________________________________________ TO USE CORRECTLY
TO USE THE BATTERY CHARGER CORRECTLY
Comply with the following instructions in order to use your Process Battery
Charger in complete safety:
• Process must be installed in a dry and well ventilated place so that it can
be allowed to cool. Never expose the instrument to direct sunlight or use
near heat sources.
• Prevent the instrument from being hit or sharply moved.
• Never obstruct the ventilation slats of the instrument.
• Never wet the instrument with water or other liquids. Do not touch it with
wet hands.
Never rest anything on the powering cable and never bend this at a right
•
angle.
• Never pull the powering cable or charging cables (red and black).
• Always disconnect the powering cable if the instrument is to remain
unused for a long period of time.
It is advisable to keep the wrapping and to use it again if the
instrument is moved to another site.
35 OPERATING INSTRUCTIONS 35