System Requirements; Getting Started - Asus Republic Of Gamers ROG PUGIO Kurzanleitung

System requirements

• Windows® 10 / Windows® 8.1 / Windows® 7
• 100 MB of hard disk space (for optional software
installation)
• Internet connection (for downloading optional software)
• USB port
Package contents
• 1 x PUGIO Gaming Mouse
• 1 x ROG pouch
• 1 x Accessory box
• 2 x Japanese-made Omron switches
• 2 x Side button covers
• 1 x ROG logo sticker
• User documentation
Specifications
Resolution
100 DPI to 12000 DPI
Default DPI 1
1600 DPI
Default DPI 2 400 DPI

Getting started

To set up your PUGIO Gaming Mouse:
1. Connect the USB cable to your computer's USB port.
2. Download Armoury from http://www.asus.com then
install it in your computer.
3. For more on programmable buttons, performance
settings, lighting effects, download and install Armoury
from www.asus.com.
IMPORTANT! When you encounter a problem while
updating the firmware, unplug the micro USB cable, then
press and hold down the left, right and scroll button on
your mouse and replug the micro USB cable to restart the
update.
Switching the side button cover
You may switch the left or right side buttons with a
cover:
1. Pull the left or right side buttons off.
2. Attach the new side button cover bundled in the
Accessory box.
4
Replacing the switches
NOTE: Refer to www.asus.com for the list of compatible
switches.
If you want to replace the switches, follow the steps
below:
1. Remove the four (4) rubber covers under your mouse,
then remove the four (4) screws and set them aside.
2. Lift the top cover
slightly, then pull it
back away from the
USB cable to remove
the top cover.
3. Disconnect the DPI indicator cable.
4. Replace the switches.
IMPORTANT!
• E nsure to install the switch with its button facing the
front of the mouse to the switch socket.
• E nsure that the switches are seated properly on the
switch sockets.
5. Reconnect the DPI indicator cable.
DPI indicator cable
6. Replace the cover and secure with the screws.
7. Replace the rubber covers on the bottom of your mouse.
NOTE: Ensure the rubber covers are pushed in
completely.
Omron
switches
Switch
sockets
Quick Start Guide