Gewiss GW 10 741 Handbuch Seite 27

PROGRAMMING WITH THE EASY CONFIGURATOR
Once the function wanted has been created, the device's functioning parameters can
now be set.
The available parameters, in relation to the function created, are listed in the tables given
below.
The value underlined is the default value.
Function: edges
Parameter: edge function
on/off
off/on
on
off
Function: scene
Parameter: scene number
1 scene 1 activation (prolonged closing: scene stored)
2 scene 2 activation (prolonged closing: scene stored)
3 scene 3 activation (prolonged closing: scene stored)
4 scene 4 activation (prolonged closing: scene stored)
5 scene 5 activation (prolonged closing: scene stored)
6 scene 6 activation (prolonged closing: scene stored)
7 scene 7 activation (prolonged closing: scene stored)
8 scene 8 activation (prolonged closing: scene stored)
Function: dimming
Parameter: push-button function
dimmer
darker
Function: blind control
Parameter: push-button function
up
down
Configuration parameters (Easy)
ON when closing, OFF when opening
OFF when closing, ON when opening
ON
OFF
increase brightness, switch on
reduce brightness, switch off
lifting the Venetian blinds, adjusting the slats
lowering the Venetian blinds, adjusting the slats
27
E
N
G
L
I
S
H