Gewiss GW 10 741 Handbuch Seite 20

CURTAIN AND ROLLER BLIND MANAGEMENT
With this function motorised curtains or roller blinds connected to a KNX actuator can be moved.
The movement of each single curtain or roller blind can be controlled with two completely separate
channels or with just one channel. The indicator LED is always off.
Method with two channels:
• prolonged touch (> 0,5 s): the blind moves (up or down depending on push-button
configuration);
• brief touch ( 0,5 s) : Stop, if the blind is moving; adjusting the slats if the blind is still and only
if the actuator is in the "Venetian" configuration.
Method with one channel:
• prolonged touch (> 0,5 s): the blind moves (in the direction opposite that of the last
movement);
• brief touch ( 0,5 s) : Stop, if the blind is moving; adjusting the slats if the blind is still and
only if the actuator is in the "Venetian" configuration.
DIMMER MANAGEMENT
It allows you to control lighting devices connected to a KNX dimmer. The operation of each
single dimmer channel can be controlled with two completely separate channels or with just
one channel. The status of the controlled dimmer channel is signalled by the LED (amber/blue)
selected, according to what is specified in the INDICATOR LIGHT paragraph.
Method with two channels:
• prolonged touch (> 0,5 s): adjusting luminosity (brighter or dimmer depending on push-
button configuration);
• brief touch ( 0,5 s) : turning on or completely off (depending on push-button configuration).
Method with one channel:
• prolonged touch (> 0,5 s): adjusting luminosity (opposite to the last adjustment);
• brief touch ( 0,5 s) : turning on or off completely depending on whether the dimmer channel
is off or on respectively.<Nessuno(a)>
SCENE MANAGEMENT
You can activate a scene with this function (brief touch 3 s) or store its new values (prolonged
touch > 3 s). In this mode the localisation LED blinks briefly if a scene learning command is
being sent. Only one scene can be associated with each input.
GENERAL DESCRIPTION
20