Noises - AEG S52900KSX0 Benutzerhandbuch

32

Noises

2. Remove the door from the pin (G). Un-
screw the pin (G) and screw it on the
opposite side.
3. Remove the cover from the top of the
door and position it on the opposite
side. side.
4. Refit the door.
5. Fix the bottom hinge (E) on the opposite
side, using the screws previously re-
moved.
6. Remove the cover (F) from the plinth (D)
by pushing it in the direction of the ar-
row and install it on the opposite side.
7. Install the plinth (D), clipping it into
place.
8. Unscrew the handle. Remove the plug
with a punch. Install the handle and the
plug on opposite side. Take from the ac-
cessory bag the two plugs and cover the
holes left open after having removed
the handle.
9. Make sure that the front board of the
door is parallel to the front board of the
top.
10. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket.
NOISES
There are some sounds during normal running (compressor, refrigerant circulation).
G
180°