Cabling - Atlantis Land WebShare 111 Kurzanleitung

PORT
ADSL (RJ11)
LAN
(RJ-45)
RESET
POWER (jack)

1.4 Cabling

First you must connect the product to the ADSL line through
the RJ11 cable you have in equipment (in the port LINE),
then connect to the RJ45 ports the PCs of your Lan or
others Switch. Once you've checked all the connections,
MEANING
Connect the supplied RJ-11 cable to
this port when connecting to the
ADSL/telephone network.
Connect an UTP Ethernet cable to
one of the four LAN ports when
connecting
office/home network of 10Mbps or
100Mbps.
After the device has turned on,
press it to reset the device or
restore to factory default settings.
The operation is as below:
•
0-3
device.
•
3-5 seconds: no action.
•
6 seconds
restore to factory default
settings (this is used when
you can not login to the
router,
password).
Connect the supplied power adapter
to this jack.
ENGLISH
to a PC
seconds: reset
or
e.g. forgot
or an
the
above:
the
27