Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LAN
(RJ-45)
RESET
POWER (jack)
POWER( Switch)
1.4 Cabling
First you must connect the product to the ADSL line through
the RJ11 cable you have in equipment (in the port LINE),
then connect to the RJ45 ports the PCs of your Lan or
others Switch. You can get to the Wireless Router through
the different client wireless compatible with the IEEE802.11b
& IEEE802.11g standard. In the end connect the AC Adapter
to the Wireless Router ADSL2+ and then to the socket.
Once you've checked all the connections and you've
Connect an UTP Ethernet cable to
one of the four LAN ports when
connecting
office/home network of 10Mbps or
100Mbps.
After the device has turned on,
press it to reset the device or
restore to factory default settings.
The operation is as below:
•
0-3 seconds: reset the
device.
•
3-5 seconds: no action.
•
6
seconds
restore to factory default
settings (this is used when
you can not login to the
router,
password).
Connect
the
adapter to this jack.
A Power ON/OFF switch.
ENGLISH
to
a
PC
or
e.g.
forgot
supplied
or
an
above:
the
power
27
Werbung
Inhaltsverzeichnis
