Technical Data; Vibration Level - Rebel Rb-1000 Bedienungsanleitung

INFORMATION ABOUT THE POWER TOOL
Intended use
This cordless drill is intended for driving in and loosening screws as well as drilling.
Use the power tool for its intended purpose only. Any other use is deemed to be a case
of misuse. The user/owner of this power tool, not the producer, is responsible for any
damages or injuries caused by improper handling of this power tool.

Technical data

Battery
Charging time
AC charger (RB-2001-CH)
Input
Output
Max. torque
Number of torque positions
No load speed
Level I
Level II
Chuck
Weight
Im Set
Sound pressure level L
Sound power level L
Hand-arm vibration a
without impact)

Vibration level

The vibration emission level stated in this instruction manual has been measured in
accordance with a standardized test given in EN 61029; it may be used to compare one
tool with another and as a preliminary assessment of exposure to vibration when using the
tool for the applications mentioned.
• Using the tool for different applications, or with different or poorly maintained
accessories, may significantly increase the exposure level.
• The times when the tool is switched off or when it is running but not actually doing the
job, may significantly reduce the exposure level. Identify additional safety measures
to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
18 V; 1,3 Ah, Li-Ion (RB-2000)
Approx. 1 h
100 – 240 V; 50/60 Hz
21 V; 1,5 A
32 Nm
18
350 rpm
1300 rpm
Up to 10 mm
1,5 kg
Tool belt hook, AC charger, battery, user's manual
81 dB(A), K= 3 dB(A)
PA
92 dB(A), K= 3 dB(A)
WA
(screw driving
1,8 m/s
h
2 K=1,5 m/s 2
51 EN