Milnor Mark II Betriebsanleitung Seite 8

Description of Controls—
Mark II, Tilt-To-Unload Washer-Extractor
H/W
Manual Flush/Spray
switch—machines with
five-compartment supply
injectors
Hold this switch to H to flush water
into the first compartment of the supply
injector. Hold this switch to W to use
the spray nozzle to clean the supply
injector.
f
Manifold Flush button
Press this button to flush the chemical
supply manifold with fresh water.
B/d
Alternate Drain switch
Set this switch to d to disable all
machine functions and hold the drain closed. The machine can be powered off with the
drain closed for overnight soaking. Set to B to permit normal operation.
_/-
Mildata Remote/Local switch—Mildata option
Set this switch to - to have the machine communicate with the Mildata computer. Set
to _ to use internal machine formulas.
E/e
Ampsaver switch—Ampsaver option
E causes the Ampsaver controller to delay extraction when necessary to prevent the
amperage drawn by all machines from exceeding a preset maximum. eprevents the
Ampsaver controller from affecting machine operation.
MSOUPLCTAE/9433AV (3 / 4)
4