Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
DISPLAY
1 - Selected channel
2 - AM/FM mode
3 - RX/TX: reception (RX) and trasmission (TX) indicator
4 - SC: SCAN function activated
5 - AQ: automatic squelch activated
6 - R: RF GAIN activated
7 - Received signal strenght indicator and trasmission power signal
BACK PANEL
1 - Power supply cable
2 - External speaker
3 - Antenna connector
INSTALLATION
Check the radio and all accessories before installing.
Power the radio with the cigarette lighter plug included in the package. The radio must be powered
at a voltage between 12 - 13.8V. The fuse mounted on the power cord protects the radio against
damage caused by technical defects or wrong polarity. If the fuse is blown, first eliminate the cause
and then replace it using the F3A 250V type.
Check the connections correctly before starting the radio. Make sure there is no risk of shortcircuit.
Operation with AC Adapter
Operate your radio only at a stabilized radio power supply, which is capable to provi-de at least 2A
at 12 -13.8V DC. Unregulated power supplies or battery chargers are unsuitable and can cause
damage. Connect the red lead to the positive (+) terminal of the power supply, the black wire to the
negative (-) terminal of the power supply.
5
TX
AQ
3
RX
1 3 5 7 9 +30
7
4
2
FM AM
M
H
6
SC R
1
4
3
2
EXT SP
ANT
1
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
