Cleaning And Maintenance - KikkaBoo ELY Gebrauchsanweisung

FRONT SWIVEL WHEELS 13
The stroller has front swivel/ xed wheels. It is recommended that you use the xed mode on
uneven surfaces and the swivel mode on normal road surfaces.
To use the front wheels in the swivel mode, push the front lever in an upward direction with your foot. To use the
front wheels in the xed mode, lower the lever with your foot. The wheel will lock in the straight position, regardless
of its previous position.
WARNING
Both wheels must always be locked or unlocked at the same time.
ADJUSTING THE HANDLE 14,15
Press down the buttons on the end of the both handles and adjust the handles to desired position.
USING THE FIVE POINT HARNESS 16,a,b,c
This stroller has a ve-point safety harness featuring two shoulder straps, two adjustment holes, a waist strap and a
crotch strap with buckle. If necessary, adjust the height of the shoulder straps, inserting them into the adjustment
hole.
After sitting your child in the stroller, fasten the safety harness, rst inserting the two prongs into the hole located
on the shoulder straps ( g.a and b) and then into the buckle of the crotch strap ( g. c). Adjust the length of the
straps to t the child's shoulders and body correctly. To unfasten the waist strap, press and pull the side prongs.
ADJUSTING THE BACKREST 17,18
Pull to the side the recline strap, and adjust the backrest to the desired height position.
Press on both sides the recline button, pull the backrest gently to the desire height/position.
NOTE: It is recommended that the backrest is in the upright position before folding the stroller.
FOLDING THE STROLLER 19,20,21
To close the stroller, pull the rear locking mechanism in an upward direction ( g. 19), press the handles downward
to complete the folding - as arrow shows ( g.20).
When the stroller is closed, the locking device located on the side of the stroller will automatically lock it in the close
position, preventing it from accidentally opening.

CLEANING AND MAINTENANCE

The cleaning and maintenance of the stroller must only be carried out by an adult.
CLEANING
The cover can be removed. Please refer to the care labels for instructions on how to clean the fabric parts.
Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of
rust if the stroller has come into contact with water.
MAINTENANCE
Lubricate the moving parts only if necessary, with a light application of a silicone based lubricant.
Regularly check the condition of the wheels and, keep them clean of dust and sand. To avoid friction that may
prevent the correct operation of the stroller, ensure that all the movable plastic parts placed along the metal frame
are clean of dust, dirt or sand. Keep the stroller in a dry place.