Technical Data; Ec Declaration Of Conformity; English (Original Instructions) - Berner 243306 Bedienungsanleitung

TABLE TOP MITRE SAW
243306
Congratulations!
You have chosen a Berner tool. Years of experience, thorough product
development and innovation make Berner one of the most reliable partners
for professional power tool users.

Technical Data

Voltage
Type
Power input
Power output
Max. blade speed
Blade diameter
Blade bore
Blade body thickness
Riving knife thickness
Riving knife hardness
Blade stopping time
Weight
CUTTING CAPACITIES
Mitre saw mode
Mitre (max. positions)
Bevel (max. positions)
Max. width of cut 90° at
max. height 85 mm
Max. width of cut at 45° mitre at
max. height 85 mm
Max. width of cut at 45° bevel at
max. height 55 mm
*Factory setting is 45°
Saw bench mode
Max. depth of cut
L (sound pressure)
PA
K (sound pressure uncertainty K)
PA
L (sound power)
WA
K (sound power uncertainty K)
WA
Vibration total values (triax vector sum) determined according to
EN 61029-1, EN 61029-2-11:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
27511_Berners Manual.indd Sec1:27
243306
V 230
2
W 1,600
W 933
min -1 3,300
mm 305
mm 30
mm 1.8
mm 2
HRC 43 ± 5
s < 10.0
kg 20
left 50°
right 50°
left 48°*
right 0°
mm 160
mm 110
mm 160
mm 0–51
dB(A) 97
dB(A) 2.9
dB(A) 109
dB(A) 3.1
m/s² 1.3
m/s² 1.5
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.32 Ω at the
interface point (power service box) of user's supply.
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
BTMTS 305
Berner declares that these products described
under Technical Data are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-11.
These products also comply with Directive
2004/108/EC and 2011/65/EC. For more
information, please contact Berner at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf
of Berner.
Armin Hess
Chairman of the Management Board
Berner Trading Holding GmbH
Bernerstaße 6
74653 Künzelsau, GERMANY
ENGLISH
27
08/07/2015 14:32