Inhaltsverzeichnis
Werbung
TECHNICAL DATA
Circular saw
Production code
Battery voltage
No-load speed n
0
Saw blade dia. x hole dia
Saw blade thickness
Blade teeth
Max. Cutting depth at 0° / 45° / 50°
Weight according EPTA-Procedure 01/2014 (Li-Ion 2,0 Ah ... 12,0 Ah)
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise information
Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 62841
Sawing of wood (Li-Ion 2,0 Ah): Vibration emission value a
Uncertainty K=
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a
standardized test given in EN 62841 and may be used to compare one tool with another. It may be used for a preli-
minary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool
is used for different applications, with different accessories or poorly maintained, the vibration and noise emission
may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool
is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: main-
tain the tool and the accessories, keep the hands warm, organization of work patterns.
WARNING Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
CIRCULAR SAW SAFETY WARNINGS
Cutting procedures
a)
DANGER: Keep hands away from cutting
area and the blade. Keep your second hand on
auxiliary handle, or motor housing. If both hands
are holding the saw, they cannot be cut by the blade.
b) Do not reach underneath the workpiece. The
guard cannot protect you from the blade below the
workpiece.
c) Adjust the cutting depth to the thickness of the
workpiece. Less than a full tooth of the blade teeth
should be visible below the workpiece.
ENGLISH
457 843 - Berner-BACCS-1 BL 18V.indd 34
457 843 - Berner-BACCS-1 BL 18V.indd 34
h,W
d) Never hold the workpiece in your hands or
across your leg while cutting. Secure the work-
piece to a stable platform. It is important to support
the work properly to minimise body exposure, blade
binding, or loss of control.
e) Hold the power tool by insulated gripping surfa-
ces only, when performing an operation where the
cutting tool may contact hidden wiring or its own
cord. Contact with a „live" wire will also make exposed
metal parts of the power tool „live" and could give the
operator an electric shock.
f) When ripping, always use a rip fence or straight
edge guide. This improves the accuracy of cut and
reduces the chance of blade binding.
g) Always use blades with correct size and shape
(diamond versus round) of arbour holes. Blades
that do not match the mounting hardware of the saw
will run off-centre, causing loss of control.
h) Never use damaged or incorrect blade washers
or bolt. The blade washers and bolt were specially
designed for your saw, for optimum performance and
safety of operation.
34
BACCS-2 BL 18V
BACCS-2 BL 18V 01 ...
... 00001-99999
18 V
5000 min
-1
190 x 30 mm
1,6 mm
24
64,5 / 46,8 / 42,6 mm
4,45 kg ... 5,55 kg
-18°C ... +50°C
BBP18V-X, BBPP18V-X
BBC14,4-18V, BBC-2
14,4-18V, BBCF 14,4V-
18V
93,5 dB(A)
104,5 dB(A)
1,8 m/s
2
1,5 m/s
2
02.08.2021 14:49:17
02.08.2021 14:49:17
Werbung
Inhaltsverzeichnis
