Tecno-gaz ONE Anwenderhandbuch Seite 37

Fig.4
- Led red:
- Led green:
- The Led becomes yellow when the welding phase is taking place properly.
Thermosealing:
- When the LED (green or red) flashing becomes fixed means that you can
thermosealing*;
*
close-to-lower lim it of o peration is p ossible that after w elding s hould w ait a f ew seconds for t he u nit
returns to operational conditions;
- Enter into the slot on the back flap of the envelope to seal POS. A
Making protrude from the crack front POS. B) the envelope of the measure that
we would like the envelope.
The bag must be placed with the film above.
Fig.5
Crack
helpful
SHORT TIME: time basis for a simple bag;

LONG TIME: double time for corrugated envelope;

13
ENGLISH