Index; Temperature Test Points - Honeywell SM-RI-X Q75 Betriebsanleitung

Honeywell

2.2 Index

The meter is equipped with the index MI-2.
Fig. 3 | Index MI-2

2.3. Temperature test points

Pressure test point
Fig. 4 | Temperature and pressure test points
Temperature sensors can be inserted into a thermowell for measuring the
gas temperature in the gas meter housing. Up to two thermowells are
available for this on turbine meters SM-RI as an option (depending on the
meter size). There are no temperature test points on quantometers Q75.
16
Property:
Mechanical roller index, 8-digit
2 x mechanical roller index, 8-digit
Index, can be turned through 355°
Protection class IP67
45° reading
Vertical reading
Connection for external pulse generator IN-
Sxx/IN-Wxx
Suitable for internal pulse generator IN-Cxx
S1xR internal reed contact pulse generator
Optional: mechanical index drive
Optional: desiccant cartridge
Optional: ENCODER
Table 1 | Properties of index MI-2
1)
One index is covered depending on the installation
position.
73024521a © Elster GmbH | All rights reserved. Subject to modification
MI-2
1)
Temperature test point
•
•
•
•
•
•
•
-
-
•
•
•