Tomy TSP500 Bedienungsanleitung Seite 3

• PORTABLE MONITORING
The Tomy Movement Sensor Pad TSP500 can be used portably with any Tomy Audio or Video monitor and has been
specifically designed to connect to the Tomy TD and TDV Monitor Series. This allows for the portable monitoring of
movement, sounds and video from afar, with the added features of: a moving sound level lights display; mains (AC)
operated power for all units (including the Movement Sensor Pad); a soft glow/multicoloured nightlight; monitoring
baby's room temperature - as well as many other features specific to each individual model.
PORTABLE AUDIO MONITORING
• Connecting to a Tomy TD or TDV Series Monitor
With the Movement Sensor Pad in position within the cot or Moses basket and
your chosen portable monitor operating as per its supplied instruction booklet,
take the connection cable (supplied with the Tomy Movement Sensor Pad
monitor) and plug one end into the
other end into the
All sounds and alarms shall automatically transfer to the Parent Unit of your
portable monitor. This will be signalled by a beep emitted by the Parent Unit of
the portable monitor (so that your baby is not disturbed).
Powering the Pad Monitor
The Pad Controller will draw power from the connected Baby Unit only if the Baby Unit is powered by the Main (AC). If
the Baby Unit is powered by Batteries (DC) the Pad Controller will continue to draw power from its own battery supply
(or will not function if none are present or they are flat).
If powering the Baby Unit via mains and therefore the Pad Controller by mains, we recommend installing a new set
of batteries within the Pad Controller so that in the event of a power failure, monitoring continues.
Fail Safe
In the event of a connection failure (possibly caused by a power failure or loss of signal etc. - please refer to Fault
Finding guide), all Movement Sensor Pad monitoring shall be transferred back to the Pad Controller, as long as it has
battery power.
Using a Tomy non TD or TDV series Monitor
With the Movement Sensor Pad in position within the cot or Moses basket place the Baby Unit of the portable monitor
within 20cm of the Pad Controller. Ensuring the volume of the Pad Controller is set to an audible level use the Parent
Unit to listen for the soft click and alarms.
GB
PORTABLE VIDEO MONITORING
socket on the Pad Controller and the
socket on the Baby Unit of the portable monitor.
4
• WARNINGS
THE TOMY MOVEMENT SENSOR PAD IS NOT A MEDICAL DEVICE DESIGNED TO PREVENT CASES OF SUDDEN INFANT DEATH
SYNDROME (SIDS).
The Tomy Movement Sensor Pad is NOT a substitute for direct supervision of your baby. Check your baby's activities at
regular intervals. Monitoring of premature babies, or those considered to be at risk, should be carried out under the
supervision of a doctor or health professional.
The Tomy Movement Sensor Pad may detect movement from many sources from both inside and outside your baby's
room, for example from fans, a washing machine, loud music, etc. Make sure that all vibration sources are eliminated
before using the Tomy Movement Sensor Pad monitor.
Always place both the Movement Sensor Pad and Pad Controller on a flat surface in the upright position, away from
baby's reach.
When the monitor is in use, DO NOT use a cot mobile or other cot accessory that may produce vibrations; the alarm
will not sound as the monitor will still be detecting movement.
The Tomy Movement Sensor Pad is perfectly safe. The Movement Sensor Pad and its cord are entirely passive; they carry
no electrical current and do not radiate any form of energy.
The Tomy Movement Sensor Pad can be used in any cot or sleeping area (that has no motion or vibration), designed to
safely hold a baby.
250 metres achievable in optimum open field conditions.
• CARING FOR YOUR MONITOR
Do not immerse any parts in liquids. Do not place in direct sunlight.
Periodically examine product for signs of damage to electrical parts and do not use until damage has been properly
repaired. Always remove batteries from the Baby Unit if using the mains adaptor for long periods of time.
• GUARANTEE
We guarantee your monitor against manufacturing defects for 2 years from the date of purchase on production of
a valid receipt. In the first instance of a manufacturing defect, we recommend that you return your monitor to its
place of purchase. If this does not satisfactorily resolve your problem, please refer to www.tomy.eu for further advice.
Full terms and conditions can be found on our website: www.tomy.eu
• BATTERY SAFETY
Removal and replacement of batteries should be carried out by an adult or under adult supervision.Take special care
to ensure batteries are inserted correctly, observing (+) and (-) polarity marks on battery and product. Do not short
circuit the contacts in the battery compartment or the battery terminals. Remove exhausted batteries from product.
Do not mix old (used) and new batteries or batteries of different types, e.g. rechargeable and alkaline or batteries
of different makes/brands. Dispose of exhausted batteries safely, and never dispose of batteries in a fire. Remove
batteries from product after use or if storing for long periods. Only use batteries of the same or equivalent type to those
recommended.
Removal and recharging of rechargeable batteries should be carried out by an adult or under adult supervision. If you
are using rechargeable batteries within the Pad Controller, they must be removed from the monitor before recharging.
Do not attempt to recharge non-rechargeable batteries.
Help the environment by disposing of your product and packaging responsibly. The wheelie bin
symbols indicate the product and batteries must not be disposed of in the domestic waste as they
contain substances which can be damaging to the environment and health. Please use designated
collection points or recycling facilities when disposing of the item or batteries.
GB
5