Avaya 7000 Serie Bedienungsanleitung Seite 20

English
Figure 3: DC power supply
Before you begin
Verify that the fan trays and power supply are compatible—ensure that the air flow direction
for all fans and power supplies match.
About this task
To install the fan trays and power supplies to your switch, use the following procedure.
Procedure
1. Insert each fan tray into a rear fan tray slot.
2. Verify that each fan tray is fully seated in the slot and secure each fan tray with two
3. Insert each power supply into a rear power supply slot.
4. Verify that each power supply is fully seated in the slot and securely clipped in
Example
The following figures illustrate how to properly insert the cooling fan trans and power supplies
into your switch.
20 Avaya Virtual Services Platform 7000 Series Regulatory Information for VSP 7024XLS
thumb screws.
If a blanking plate covers the required power supply slot, remove the plate before
inserting the power supply.
place.
Comments? infodev@avaya.com
June 2012