Hawke 46 102 Bedienungsanleitung Seite 9

MAIN MENU: SETTINGS
SETTINGS: BASIC
Set Date
Setting the date before use will ensure the correct month, day and year are recorded on the image.
SETTINGS – Basic (default) – Set Date – Use the left and right arrows to move between 00
(month), 00 (day) and 0000 (year) – Use the up and down arrows to edit the selected number –
Press "OK" to confirm.
Set Time
Setting the time before use will ensure the correct time is recorded on the image or video.
SETTINGS – Basic (default) – Set Time – Use the left and right arrows to move between 00
(hours) and 00 (minutes) – Use the up and down arrows to edit the selected number – Press
"OK" to confirm.
Delay Time
Camera delay is used to set the amount of time that the camera will sleep between taking images
after the PIR has triggered. This setting ranges from 1 second to 10 minutes. The default delay is
5 seconds. SETTINGS – Basic (default) – Set Delay – Use the left and right arrows to move
between 00 Min (minutes) and 00 Sec (seconds) – Use the up and down arrows to edit the
selected number – Press "OK" to confirm.
9