Hawke 46 102 Bedienungsanleitung Seite 12

Night Video Size
Sets the quality for videos captured at night from 720P to 1080P. SETTINGS – Video – Night
Video Size – Use the left and right arrows to move between 720p and 1080p – Press "OK" to
confirm.
Night Video Time (Length)
Sets the length for videos captured at night from 5 to 30 seconds. SETTINGS – Video – Night
Video Time – Use the up and down arrows to move from 5 to 30 seconds – Press "OK" to
confirm.
SETTINGS: ADVANCE
Duty Time
Sets the camera to work during a specific time of the day. This will affect all three working modes
(PIR (motion detection), Time Lapse and Both). The default duty time is 24 hours per day (from
00:00 to 00:00). SETTINGS – Advance – Duty Time – Use the left and right arrows to move
between start and finish times – Use the up and down arrows to edit the selected number – Press
"OK" to confirm.
TL Interval
Sets the interval time if you have selected Time Lapse or Both in the Working Mode setting. Can
be set from 1 minute to 24 hours. SETTINGS – Advance – TL Interval – Use the left and right
12