Hawke 46 102 Bedienungsanleitung Seite 7

Insert the strap through the slots on the rear of the camera. Wrap the strap around the mounting
surface. Secure the strap and tighten the buckle. Ensure the camera clasp is closed to obtain proper
weather resistance.
CAMERA COVERAGE
Mount the camera in the location it will be used. Open the camera and select PREVIEW at the
main menu. Close the camera. After 30 seconds a red light on the front of the camera will blink
when you enter the coverage area. Adjust the camera's position as needed. Press the "SETUP"
button to return to the main menu.
VIEW MEDIA ON COMPUTER
Push the power switch into the "ON" position. Connect the camera to your computer with the
USB lead supplied, your computer will recognize the camera as mass storage. The camera's display
will turn off while connected. You can now view, move or delete the media on the camera's SD
card. Ensure the power switch is in the "OFF" position before disconnecting the camera from your
computer.
VIEW MEDIA USING CARD READER
Depress the SD card and remove it from the camera. Insert the SD card into a card reader (not
supplied). You can now view, move or delete the media on the SD card.
7