Before Proceeding; Checking Supplied Accessories; How To Use This Manual - Pioneer PDA-5004 Bedienungsanleitung

Before Proceeding

Checking supplied accessories

Check that the following accessories were supplied.
1
Label for remote control unit
PDA-5003
RGB (BNC)
PDA-5004
COMPONENT
2
Connector indicator label
PDA-5003
INPUT3 INPUT4 AUDIO
VIDEO INPUT3/4
(ON SYNC)
S-VIDEO IN OUT R L G
PDA-5004
INPUT3 INPUT4
AUDIO VIDEO
S-VIDEO
R R L L IN OUT
3
Screws (×2)
(Accessory screws for installing video card)
÷ These Operating Instructions
÷ Warranty

How to use this manual

This manual has been written to allow easy
understanding of setup and operating procedures when
the video card PDA-5003/PDA-5004 is installed in the
plasma display.
Remove the video card from its packaging and confirm
that all accessory parts are present. While installing and
setting up the video card, consult the section "Part
Names and Functions" starting on page 4 of this manual
and in the plasma display's Operating Instructions to
familiarize yourself with the parts of the respective
devices. Since this manual makes frequent reference to
the names of operating buttons on the plasma display,
use the display's Operating Instructions to familiarize
yourself with the controls on the display and the remote
control unit.
The section "Installation and Connections" starting on
page 6 includes information necessary for installing the
video card on the plasma display, together with
instructions regarding connections to various other
components.
2
En
INPUT5
ANALOG RGB AUDIO
(H/V SYNC)
B R HD VD R L
INPUT5
AUDIO COMPONENT VIDEO AUDIO
R L Y Pb/Cb Pr/Cr R L
The section "System Settings" starting on page 18
covers the on-screen settings necessary for correct
operation of the plasma display with its connected
components. Depending on the connections made, this
section may or not be necessary.
The remainder of the sections in this manual is dedicated
to the basic operations associated with selecting a source
component up to the more complex operations
associated with adjusting the plasma display picture to
match the requirements of specific components and
personal preferences.
Regarding menu displays
The example menu displays provided in this manual are
those for the PDP-505CMX/PDP-504CMX/PDP-50MXE10/
PDP-50MXE11/PDP-50MXE1/PDP-50MXE1-S model. The
PDP-434CMX/PDP-43MXE1/PDP-43MXE1-S display
differs as shown:
Please note that the actual contents displayed are the
same for both the PDP-505CMX/PDP-504CMX/PDP-
50MXE10/PDP-50MXE11/PDP-50MXE1/PDP-50MXE1-S
and PDP-434CMX/PDP-43MXE1/PDP-43MXE1-S.
Certain menu layouts differ between PDP-505CMX/PDP-
50MXE10/PDP-50MXE11 and PDP-504CMX/PDP-
50MXE1/PDP-50MXE1-S.
Example of PDP-505CMX/PDP-504CMX/PDP-50MXE10/
PDP-50MXE11/PDP-50MXE1/PDP-50MXE1-S Menu
Display:
MENU
PICTURE SCREEN
:
CONTRAST 0
:
BRIGHTNESS 0
:
COLOR 0
:
TINT 0
:
SHARPNESS 0
PICTURE RESET
SET ENTER
Example of PDP-434CMX/PDP-43MXE1/PDP-43MXE1-S
Menu Display:
MENU
PICTURE SCREEN SETUP
:
0
CONTRAST
:
BRIGHTNESS 0
:
COLOR 0
:
TINT 0
:
SHARPNESS 0
PICTURE RESET
ENTER
SET MENU
INPUT1
SETUP OPTION
MENU EXIT
INPUT1
OPTION
EXIT