Suspended Ceiling Installation-Drop Ceiling Tiles - Avaya 2330 Schnellinstallationsanleitung

Suspended ceiling installation—drop ceiling tiles
This procedure applies to T-bars that are 23.9 mm (15/16 inch), 14.2-mm (9/16 inch), or 15.9-mm (5/8 inch) wide. You
also can use this procedure for flush ceilings with 14.2-mm (9/16 inch) or 15.9-mm (5/8 inch) T-bars.
Access
point
1
Use the mounting template to cut a hole for the CAT-5 Ethernet cable (ferrite beaded for AP 2330).
2
Install the T-bar clamp that fits the T-bar.
T-bar
T-bar clamp halves
23.9-mm (15/16 inch) or 14.2-mm (9/16 inch) T-bar
(The clamps are different widths but the assembly is the same.)
3
Remove the mounting bracket from the access point.
T-bar clamps
Mounting
(use set that fits T-bar)
template
Slide together
Avaya WLAN Access Point 2330/2330A/2330B Quick Installation Guide
WLAN Access Points 2330/2330A/2330B 65
Mounting
bracket
T-bar
T-bar clamp halves
15.9-mm (5/8 inch) T-bar
Slide together